E-Bike Classes Explained: What Class 1, 2 and 3 Mean When You Buy
GuidePublished
We don't ride these bikes. Specs come from our database, converted to the same units. How we research them
Under the three-class definitions explained by PeopleForBikes, Class 1 assists only while you pedal and cuts motor assistance at 20 mph. A Class 2 motor can propel the bike without pedaling, usually through a throttle, and cuts assistance at 20 mph. Class 3 assists only while you pedal and cuts assistance at 28 mph. Those cutoffs describe motor assistance, not the fastest speed you can reach by pedaling; check a bike’s factory setting, selectable modes and label separately.
A class number on a listing looks like one simple fact. It's really several: how the motor helps, where it stops helping, how the bike ships and which modes it can switch to. This guide starts with the three definitions, then separates the speed numbers, explains what a “Class 1, 2, 3” listing means and ends with how to use class when you choose a bike.
E-bike classes at a glance
Class definitions as explained by PeopleForBikes. “Assistance stops at” is where the motor stops helping, not the bike's top speed.
Class
Class 1
- When the motor helps
- Only while you pedal
- Moves the bike without pedaling?
- No
- Assistance stops at
- 20 mph
Class
Class 2
- When the motor helps
- Can propel the bike without pedaling, usually through a throttle
- Moves the bike without pedaling?
- Yes
- Assistance stops at
- 20 mph
Class
Class 3
- When the motor helps
- Only while you pedal
- Moves the bike without pedaling?
- No
- Assistance stops at
- 28 mph
Read the last column carefully. A cutoff is where the motor stops helping, not a speed the bike promises and not a ceiling on your own effort. As VICE puts it, the limit is “just the maximum speed an ebike is allowed to reach under electrical assistance, not a guaranteed minimum.” Past the cutoff you can still go faster under your own power; the motor simply isn't helping anymore. The PeopleForBikes definitions also set conditions beyond speed, including working pedals and a motor power rating of less than 750 watts, and they describe three classes only. PeopleForBikes sets them out on its page about federal e-bike rulemaking, so read them as the common three-class vocabulary, not as a statement of what's allowed on a particular road or trail. Where each class may be ridden is a separate question, covered below.
What the speed number does—and does not—tell you
A product page can show several speeds, and they don't all mean the same thing. Before you compare two bikes on “speed,” sort each number into one of these:
- Throttle speed: how fast the throttle alone will move the bike, in the mode you're using.
- Pedal-assist cutoff: the speed at which the motor stops helping while you pedal. This is the number the class definitions use.
- Your own speed: what you reach by pedaling past the cutoff. No class number limits it, because the motor is no longer helping.
- Listed top speed: a single manufacturer figure that may refer to any of the above, or to one mode only. Find out which before you treat it as the bike's class.
This isn't a theoretical mix-up. Owners on r/ebikes ask whether a bike whose throttle stops at a lower speed than its pedal assist counts as Class 2 or Class 3; we walk through that case in our guide to switchable e-bike classes. Two cutoffs on one bike describe two different behaviors, and a single top-speed figure can't settle which class applies. Even a manufacturer that sells Class 3 bikes says so: Mokwheel's Class 3 page tells buyers: “A 20 mph figure does not describe every part of an e-bike’s speed configuration.” It asks them to check whether it refers to throttle operation, a default setting or pedal assistance. The manufacturer data in our catalog shows the same gap: some bikes their manufacturer lists as Class 2 also carry a manufacturer top-speed claim above the Class 2 cutoff. That's why we don't classify a bike by combining its listed class with its listed top speed, and why you shouldn't either. Check how the manufacturer classifies each mode instead.
What “Class 1, 2, 3” on a product page means
A listing that says “Class 1, 2, 3” usually describes the modes the manufacturer says the bike can run in. It isn't a fourth class, and the bike doesn't run as all three at once; PeopleForBikes calls these “multiple-mode electric bicycles.” On such a bike, “class” can mean four things: the class it ships in, the modes you can select, the mode it's in right now and the class on its label. The class in our catalog is the manufacturer's list of classes, so it doesn't answer the other three. In our catalog, the classes listed by manufacturer are 1, 2, 3 for the Aventon Level 4 ADV, 1, 2, 3 for the Ride1Up Vorsa and 1, 2, 3 for the Velotric Tempo. Yet Aventon says the Level 4 ADV comes out of the box as a Class 1 eBike with no throttle, Ride1Up says the Vorsa ships pre-programmed as a class 2 ebike, and the Velotric sources we read don't say which mode the Tempo ships in. How switching works, and what each mode does to the throttle, is covered in our guide to switchable e-bike classes.
How to use class when choosing a bike
- Do you need a throttle? If you want the motor to move the bike without pedaling, you're looking for Class 2 behavior; Class 1 vs. Class 2 e-bikes compares the two. On a bike that switches modes, check which modes keep the throttle working.
- Do you want assistance above 20 mph? Under the definitions above, only Class 3 assistance continues past 20 mph, up to 28 mph, and only while you pedal. If you're deciding between a throttle and that higher cutoff, see Class 2 vs. Class 3 e-bikes.
- How does the bike ship? Find the factory class in the manufacturer's own wording.
- What can you switch to, and how? A button, an app or an unlock step, and whether switching changes what the throttle does. See what to check before you switch.
- Where will you ride? Check the rules for that place and for the class or mode you plan to use.
Put simply: if you need a throttle, look at Class 2 behavior; if you want pedal assistance up to 28 mph, look at Class 3; if you want assistance only while you pedal, up to 20 mph, that's Class 1. On a bike that switches modes, answer the same questions for the mode you'll actually ride in.
Shoppers' own priorities show why the answer differs from rider to rider. One r/ebikes shopper looking for a Class 2 bike with a throttle, hydraulic brakes, a torque sensor and a step-through frame summed up the plan: “Main purpose is just for grocery runs.” Another, weighing a Class 2 for town and light trails, wrote: “The rules are all over the place here. I would never use the throttle on the trail, but it might be nice for in town.” Those are personal choices, not advice on where a throttle is allowed.
Class describes how the motor helps. It says nothing about brakes, frame, range or how well the bike suits the roads and paths you ride, so check those separately once you've narrowed down the class.
Is there a Class 4? Where can this class be ridden?
Frequently asked questions
What is the difference between Class 1, 2 and 3 e-bikes?
How the motor helps and where it stops helping, as laid out in the comparison table. For head-to-head comparisons, see Class 1 vs. Class 2 and Class 2 vs. Class 3.
Can a Class 3 e-bike have a throttle?
The Class 3 definition quoted here covers assistance only while you pedal. Some bikes, though, run in several modes. Velotric, for example, says the Nomad 2 defaults to Class 2 with the throttle enabled and a 20 mph max speed, and that its Class 1 and Class 3 modes turn the throttle off; the Tempo's FAQ says it doesn't support throttle unlock in Class 3. Check what the throttle does in each mode of the specific bike, and don't work out the class from two speed numbers; our switchable-class guide covers that case.
If I set my e-bike to 20 mph, does it become Class 2?
Not on its own. Lowering a limit on the display changes the current setting. It doesn't answer what class the bike shipped as, what its label says, or whether that setup is accepted where you ride. Check the manufacturer's documentation and the rules where you ride, and see what to check before you switch.
What does “Class 1, 2, 3” mean on a listing?
Usually, the modes the manufacturer says the bike can run in. Lectric's FAQ, for instance, says several of its models “can be unlocked to achieve class 3 settings.” For any bike listed this way, check the factory mode, how you switch, whether the throttle works and where assistance stops in each mode. See what multi-class listings mean and our guide to switchable e-bike classes.
Find the class that fits your ride: go through the five questions above with each bike's manufacturer page open. Then compare Class 1 vs. Class 2 or Class 2 vs. Class 3, and if a bike lists more than one class, read how switchable classes work.