Can You Switch Your E-Bike’s Class? Built-In Modes, Unlocks and Your Own Changes
GuidePublished
Sometimes, but “switching class” covers three different things. You can select a mode the manufacturer built in, sometimes with a single button. You can unlock a setting the bike doesn't ship with, if the manufacturer offers that step for your model. Or you can lower limits or remove parts yourself, which changes how the bike runs but not what it shipped as or what its label says. Some bikes can't switch in every direction. Whichever route applies, check what the throttle does and where assistance stops in the new mode before you count on it.
Before you change your e-bike's class, or buy one because it can change, work out which kind of change you mean. This guide separates the three ways a class gets switched, then covers built-in modes, unlocks, changes you make yourself and the question riders keep asking about a 20 mph throttle with 28 mph pedal assist. For what Class 1, 2 and 3 mean in the first place, and how to read a listing that names several classes, see our guide to e-bike classes.
Three things people mean by “switching class”
A bike that can run in more than one class can change how it behaves, but the route matters. Who designed the change decides what you can rely on afterwards: a mode the manufacturer built and documented, a setting it lets you unlock, or a change you made on your own. There's also a fourth outcome: the manufacturer may not offer the switch you want at all.
One example of each route, from manufacturer pages and a rider thread read on October 22, 2026. Examples, not a ranking, and not a legal classification of any bike.
What you do
Select a built-in mode
- Who designed it
- The manufacturer
- Example, in the source's own words
- Velotric on the Nomad 2: “The default is Class 2 (throttle enabled, 20MPH max speed),” with the throttle off in its Class 1 and Class 3 modes (Velotric product page)
- What to confirm first
- What the throttle does and where assistance stops in each mode
What you do
Unlock a setting
- Who designed it
- The manufacturer, for the models it names
- Example, in the source's own words
- Lectric: the named lines “can be unlocked to achieve class 3 settings” (Lectric FAQ)
- What to confirm first
- That the unlock covers your exact model and version, and what the throttle does afterwards
What you do
Change limits or parts yourself
- Who designed it
- You
- Example, in the source's own words
- A rider who had changed the speed setting and removed the throttle asked whether dialing it back down made the bike Class 2 (r/ebikes thread)
- What to confirm first
- Whether the manufacturer documents that setup for your model; the change doesn't alter what the bike shipped as or its label
What you do
Nothing: no switch offered
- Who designed it
- The manufacturer
- Example, in the source's own words
- Ride1Up: “Our Class 3 models are not able to be switched into Class 2 mode” (Ride1Up support page)
- What to confirm first
- Which direction, if any, your exact model can switch
Selecting a built-in mode: what else changes with it
A built-in mode is the most predictable kind of switch, because the manufacturer decided what each mode does. The catch is that the mode's name tells you the class it's meant to match, not every behavior that comes with it. When you select another mode, up to three things can change together: whether the throttle works, where pedal assist stops, and where the throttle stops if it still works.
The Nomad 2 shows why that matters. Velotric's product page says the bike defaults to Class 2 with the throttle enabled, and that its Class 1 and Class 3 modes turn the throttle off. So on that bike, choosing the mode Velotric calls Class 3 also means giving up the throttle. The page we read doesn't say where pedal assist stops in the non-default modes or how you select them, so those are questions to put to Velotric. How the switch is made varies by bike: Velotric's launch announcement for the Tempo, for example, describes a single button rather than a settings menu.
Don't assume a switch runs in both directions. Ride1Up's support page says: “Our Class 3 models are not able to be switched into Class 2 mode.” That statement covers Ride1Up's Class 3 models, not everything the company sells, and it's a reminder to ask about the exact direction you want: up, down or both.
Unlocking a setting: a separate step from choosing a mode
Some manufacturers ship a bike in one class and offer a way to unlock another. Lectric's FAQ says its bikes ship as Class 2, and that “the XP, XPedition, XPeak, XPress, and XPress Lite bikes can be unlocked to achieve class 3 settings.” The word “unlocked” is the point: Lectric describes a step between the factory setting and the Class 3 setting, not a mode you pick from the day the bike arrives.
At least one third-party buying guide describes the factory state the same way. ebicycles.com writes: “By default, Lectric XP 3.0 has a maximum assisted speed of 20mph (throttle assist), which fits it under class 2.” That's the guide's description of one model version, not a statement from Lectric.
Lectric names product lines rather than specific versions, and a line can span more than one generation. Before you count on an unlock, confirm that it applies to the exact model and version you're buying, how it's done, and what the throttle does once the Class 3 settings are active. We haven't matched the FAQ to individual bikes in our catalog.
Lowering limits or removing the throttle yourself
The third kind of change isn't a mode at all. Riders sometimes adjust the speed limit in a bike's settings or take parts off, then wonder what class they're riding. One r/ebikes poster who had changed the speed setting on a Priority Current Plus and removed its throttle asked whether dialing it back down to 20 MPH would make the bike Class 2.
A change you make yourself differs from a mode the manufacturer built in one important way: the bike's documentation and label don't change with it. If the manufacturer offers a mode that does what you want, use that mode and keep its documentation. If it doesn't, a lower limit you set may make the bike slower, but it isn't a class you can point to. The same goes for removing a throttle. Before you rely on any setup like this, check what the manufacturer documents for that exact model.
Throttle at 20 mph, pedal assist at 28 mph: Class 2 or Class 3?
This question comes up when the two limits on one bike don't match. An owner on r/ebikes reported a throttle that stops at 20 mph and pedal assist that reaches around 28 mph, and asked which class that makes the bike. Those speeds are the owner's own report, not manufacturer figures. If your bike runs in one fixed mode and doesn't have this mismatch, you can skip this section.
- Same mode or two modes? Find out whether the throttle limit and the pedal-assist cutoff belong to one mode or to two modes you switch between.
- Throttle in the mode the manufacturer calls Class 3? Check whether it works there. On the Nomad 2, Velotric says it doesn't.
- What does the label say? Check which class the manufacturer states on the bike and the listing for the mode you'll ride in.
What to check before you buy or switch
- Which route is it? A built-in mode, an unlock step or a change you'd make yourself.
- Which mode does it ship in? Ask for the manufacturer's own wording.
- Which directions can it switch? Up, down or both, for the exact model and version.
- Does the throttle work in each mode? Ask mode by mode, not for the bike as a whole.
- Where do the throttle and pedal assist stop in each mode? That's two numbers per mode, not one top speed.
- What label and documents come with the bike? And do they cover the mode you'll actually ride in?
Where you can ride after changing modes
Frequently asked questions
Can you convert a Class 2 e-bike to Class 3?
It depends on the model. Some bikes have a built-in Class 3 mode, some need an unlock step, and some can't switch in a given direction at all: Lectric's FAQ says several of its lines “can be unlocked to achieve class 3 settings,” while Ride1Up says its Class 3 models can't be switched into Class 2 mode. Follow the manufacturer's instructions for your exact model rather than a general method. See the three ways to switch.
Is unlocking Class 3 the same as switching modes?
No. Selecting a built-in mode uses settings the bike offers as delivered. An unlock is a separate step the manufacturer describes for the models it names, between the factory setting and the higher one. Check that the unlock applies to your exact model and version, and what the throttle does afterwards. See unlocking a setting.
Do all modes on a Class 1, 2, 3 e-bike have a throttle?
Not necessarily. Velotric says the Nomad 2 has the throttle on in its default Class 2 mode and off in its Class 1 and Class 3 modes. If you want a throttle, check which modes keep it before you switch, and before you buy. See built-in modes.
If the throttle cuts off at 20 mph and pedal assist reaches 28 mph, is it Class 2 or Class 3?
The two numbers don't settle it on their own. Check whether they belong to the same mode or to two separate modes, whether the throttle works in the mode the manufacturer calls Class 3, and which class the manufacturer labels it. See the full answer.
Check your bike's factory mode and selectable settings before you buy. Take the questions above to the manufacturer's page for each bike on your list, and write down the factory mode, how each switch is made and whether the throttle works in the mode you'll actually ride.