eBikeMetric
eBikeMetric

Hub Motor or Mid-Drive for Your Commute?

GuidePublished

We don't ride these bikes. Specs come from our database, converted to the same units. How we research them

If your commute is mostly flat, a hub-motor bike may do what you need. If your route has climbs, or you want assist that works through the bike's gears, put a mid-drive on your shortlist too: working through the gears is the usual reason mid-drives come up for hills. Either way, judge the exact bike on a route like yours, not by where the motor sits or by a claimed torque figure alone. The pedal sensor is a separate choice: some hub-motor bikes, such as the Aventon Level 4 REC and Velotric Discover 3, list torque sensing, so check the motor type and the sensor type for the exact version you're buying.

Hub or mid-drive is one of the first spec-sheet choices commuters run into, and it often gets mixed up with other choices. This guide covers where each motor drives the bike and what each placement tends to mean, how to match the motor to your route, how the pedal sensor changes the feel and what changes in upkeep. Then it compares hub and mid-drive versions from the same brand, shares one commenter's suggestion and ends with what to test before you buy. We haven't ridden these bikes. Figures are manufacturer claims from our catalog.

Where does each motor drive the bike?

A hub motor sits in the center of a wheel and turns that wheel directly. A mid-drive sits at the cranks, between the pedals, and sends its power through the chain and the bike's gears, the same path your legs use. That's the difference in placement. On its own, it doesn't tell you which bike is quicker, which climbs better or which suits your commute.

Spec sheets mix two separate part choices together, and both get confused with how the motor is switched on. Keep them apart when you compare bikes:

  • Motor type: where the motor is. In a wheel hub or at the cranks.
  • Sensor type: how the bike reads your pedaling. A cadence sensor or a torque sensor, and on some bikes a switch between the two. This decides how the assist responds, and it isn't tied to one motor type.
  • Pedal assist or throttle: how you operate the bike, not a part choice. As Lectric puts it, “Pedal assist responds to your pedaling, while a throttle moves the bike with a twist and doesn't require pedaling at all.”

What each placement tends to mean on a commute

Buying guides that compare the two, such as Outside's commuter guide and Velo Index's mid-drive collection, weigh them on climbing, carrying the bike and drivetrain upkeep. The table below follows from where each motor sits. It's our reasoning about tendencies, not a test result, and a specific bike can break any of them.

Tendencies that follow from motor placement. Our editorial reasoning, not test results or measured differences. Check the exact bike.

  • Trade-off

    Climbs

    Hub motor tends to
    Turn the wheel directly, so the motor doesn't gain anything when you shift to an easier gear. On a mostly flat route that may not matter.
    Mid-drive tends to
    Work through the gears, so it can use an easy gear on a climb the way your legs do. That's the usual reason mid-drives are suggested for hilly routes.
  • Trade-off

    Chain and gears

    Hub motor tends to
    Keep the motor's power off the chain and gears. Those parts carry only your pedaling.
    Mid-drive tends to
    Send the motor's power through the chain and gears as well as your pedaling, so those parts deserve more attention. Ask the shop how often it wants to check them.
  • Trade-off

    Wheels and flats

    Hub motor tends to
    Make the motor part of one wheel, so fixing a flat on that wheel involves the motor too. Ask how it's done before you need it.
    Mid-drive tends to
    Leave both wheels free of the motor, so a flat is closer to a flat on a regular bike.
  • Trade-off

    Carrying the bike

    Hub motor tends to
    Put the motor's weight in a wheel.
    Mid-drive tends to
    Put the motor's weight low in the middle of the bike.
  • You can probably skip a mid-drive if your route is mostly flat and you'd rather keep the motor's load off the chain and gears.
  • Don't stop at hub motors if your route has long climbs, especially ones you ride with a load. Ride a mid-drive on the same climb before you decide.
  • Either way, if you'll carry the bike up stairs, lift the exact version. Where the motor sits doesn't tell you which bike is lighter, and the pairs below differ in more than the motor.

Match the motor to your usual route

Before you compare motors, write down what your commute actually looks like. The answers tell you what to test, which matters more than any motor label.

  • Flat stretches. How much of the trip is level road or bike path? On a mostly flat route, motor placement may matter less than comfort, equipment and how the assist feels.
  • Climbs. Where are they, how long do they last, and do they come at the end of a long day? A mid-drive works through the gears, so test whether that suits your hills, and test a hub-motor bike on the same climb.
  • Stops and starts. Count the lights and stop signs. Pulling away from a stop again and again is worth testing on each bike you're considering.
  • What you carry. A loaded bag or rack adds weight on every climb and every start, so test with a load like yours if you can.

A claimed torque figure can't tell you how a bike will handle your particular hill, so ride it there if you can. For choosing a bike around steep or long climbs, see e-bikes for hilly commutes. Battery size is a separate question: see how much battery you need for your commute.

How does the pedal sensor change the feel?

How the assist feels comes mostly from the sensor and the bike's settings, not from motor placement alone. These are the terms you'll see:

Terms on a commuter e-bike spec sheet. Feel descriptions are a manufacturer's wording, not our test results.

  • Term

    Pedal assist

    What it describes
    The motor helps while you pedal
    How a brand describes it, and what to check
    How many assist levels there are and how they feel on your route
  • Term

    Throttle

    What it describes
    The motor moves the bike without pedaling
    How a brand describes it, and what to check
    Whether the bike has one and which class mode it ships in. See e-bike classes explained
  • Term

    Cadence sensor

    What it describes
    Reads whether you're pedaling
    How a brand describes it, and what to check
    Lectric calls it “an effortless boost that lets the motor do the work for you.” Check whether that suits stop-and-go traffic
  • Term

    Torque sensor

    What it describes
    Reads how hard you press on the pedals
    How a brand describes it, and what to check
    Lectric calls it “a responsive, performance-driven ride that amplifies your pedaling effort.” Check that the bike lists it for the exact version you're buying
  • Term

    Claimed motor torque

    What it describes
    The manufacturer's figure for motor output, in newton-meters
    How a brand describes it, and what to check
    Treat it as a claim, not a climbing result

Both feel descriptions come from Lectric's XPress2 Commuter page, which offers a choice between the two sensors. Two hub-motor commuters in our sources list torque sensing too. Aventon's Level 4 REC page lists it as “Sensor Switch Compatible (Cadence & Torque),” and Velotric's Discover 3 page lists a torque/cadence sensor. Our sources don't confirm the sensor on the mid-drive Level 4 ADV or Discover M, so check those pages yourself rather than assuming a mid-drive comes with a torque sensor.

What changes in upkeep?

Upkeep differs where the trade-offs above differ: a mid-drive puts the motor's power through the chain and gears, and a hub motor puts the motor in a wheel. Ask the brand or a local shop these questions before you buy:

  • Who will service this motor near you? Ask a local shop whether it works on this brand's motor system, or whether repairs go through the brand.
  • Can you get parts? Ask whether a replacement motor, controller and display are sold for this exact version, and how long they take to arrive.
  • On a mid-drive: ask the shop what it recommends for checking and replacing the chain and other drivetrain parts on this bike.
  • On a hub motor: ask how a flat on the motor wheel gets fixed and whether you could do it yourself on the way to work.
  • What does the warranty cover on the motor, and who pays for shipping or labor if it fails?

If you choose a hub motor and you'll ride before sunrise or after dark, plan for a flat on that wheel. See e-bike commuting in the dark. We don't have sourced figures on repair costs, part life or reliability for hub motors versus mid-drives, so we won't estimate them. For the overall cost of buying and kitting out an e-bike, see how much an e-bike costs.

Hub and mid-drive versions from the same brand

Two brands in our catalog sell a commuter in both a hub-motor and a mid-drive version, which makes them useful examples. Aventon's ADV vs. REC guide says the two Level 4 versions “share the same frame geometry, A280 display, integrated lighting, rack, fenders, and full ACU smart platform.” Velotric's Discover 3 page says “Discover 3 and Discover M come standard with” pre-installed fenders and a rear rack. Each pair still differs in more than the motor, including battery and weight, so don't read a difference in the table as the effect of the motor alone.

Hub and mid-drive versions from the same brand. Motor and sensor type come from the manufacturer pages linked in each cell. Torque, battery and weight are manufacturer claims from our catalog. “Not verified” means our sources don't confirm it. “Not available” means our catalog doesn't have the figure yet. Rows are grouped by brand and listed alphabetically. They aren't ranked.

Use the table to see what to check, not which bike wins. If one version of a pair fits your route, open its product page and confirm the motor, sensor, battery and weight for the exact version and the current listing before you buy. Our catalog doesn't have torque, battery or weight for the Discover 3 yet, so look those up on Velotric's page rather than borrowing the Discover M's figures.

What one commenter suggests

The suggestion shows a useful habit. Once you've decided which motor type suits your route, compare bikes of that type with each other, then look at sensor, equipment and weight. Comparing across motor types is the step that needs a test ride on your route.

Decide what to test before you buy

  • Ride a route like yours. Include your steepest climb and a stretch with stops and starts, carrying a load like the one you'll carry.
  • Try every assist level and sensor mode. If the bike can switch between cadence and torque sensing, try both on the same stretch.
  • Compare like with like. Ride the hub and mid-drive versions back to back if a shop has both, and note what else differs between them.
  • Ask about service before you pay. Use the upkeep questions above. If you're buying online, ask how repairs and returns work.

Motor type is one part of choosing a commuter. To pick a bike for your whole trip, including parking, charging and the equipment you need, go back to best commuter e-bikes.

Frequently asked questions

Do I need a mid-drive for a flat commute?

Not necessarily. On a mostly flat route, a hub-motor bike may do what you need. Check how the assist feels, which sensor the exact version has and whether the rest of the bike fits your route. See how to match the motor to your route.

Is a mid-drive better for hills?

Not automatically. A mid-drive works through the bike's gears, which is the usual reason it's suggested for climbs, but how a bike handles your hill depends on the exact bike. Ride both types on the same climb if you can, and see e-bikes for hilly commutes.

Is a hub motor lower maintenance?

We don't have sourced figures comparing upkeep by motor type. A hub motor keeps the motor's power off the chain and gears, but the motor sits in a wheel, which changes how a flat on that wheel gets fixed. See what each placement tends to mean and ask the upkeep questions for the exact bike.

Is a torque sensor the same as a mid-drive motor?

No. Motor type is where the motor sits. A torque sensor is how the bike reads your pedaling. The Aventon Level 4 REC and Velotric Discover 3 both use hub motors, and their manufacturer pages list torque sensing. Read the motor and sensor specs separately. See how the pedal sensor changes the feel.

Does a higher torque figure prove a bike climbs better?

No. Claimed motor torque is the manufacturer's figure, not a climbing test under the same conditions. Test the bike on your hill if you can, and see e-bikes for hilly commutes.

Which motor costs less to own?

We don't have sourced figures to compare ownership costs by motor type. Ask about service, parts and warranty for the exact bike, using the upkeep questions. For the overall cost of an e-bike, see how much an e-bike costs.

Your next step

Write down your route, then test the exact version. Note your climbs, stops and load, open the product page of each bike you're considering to confirm its motor and sensor, and ride it on a route like yours. Then finish your choice with best commuter e-bikes.